Everything you need in one bag
Moving a canoe by car can be intimidating, especially if you don’t have crossbars or a factory rack. Competitor kits stress universal foam blocks and cam‑strap tie‑downs; Level Six offers the same convenience in a streamlined bundle. This kit contains:
- Four foam blocks – These moulded blocks rest on the vehicle roof and cradle the canoe’s hull. Foam block kits are designed to provide a non‑skid, cushioned contact surface and can prevent scratching while absorbing vibration. Level Six’s blocks support the canoe’s gunwales and keep the boat steady during loading and travel.
- 1 × 5‑m centre strap – Run the webbing over the canoe and through the vehicle to secure the middle of the boat. Competitor kits often use 15 ft (4.6 m) cam‑buckle straps for this purpose; Level Six’s 5‑m strap gives similar reach and tension without bulky buckles.
- Two V‑straps – Each strap branches into two arms that attach to the bow or stern of the canoe and converges at a single hook or loop for the vehicle’s tow point. Proper bow and stern tie‑downs are essential for safe transport, helping to prevent forward/backward movement and crosswinds from shifting the boat.
- Mesh carrying bag – Keeps foam blocks, straps and V‑straps organized when not in use. A mesh bag also aids drying after use, similar to the mesh storage totes included in some competitor kits.
How to use it
- Place foam blocks: Position two blocks near the canoe’s yoke and two near the stern, spacing them evenly. Ensure both the roof and blocks are clean to minimize abrasion.
- Secure the centre strap: Loop the 5‑m strap over the canoe, running it through the doors or around the roof rails (if present). Tighten to hold the boat firmly against the foam blocks.
- Attach V‑straps: Connect each V‑strap’s two ends to the canoe’s bow or stern handles. Attach the single end to a strong point under the vehicle (tow hook or frame) and tension it. Avoid attaching hooks to plastic bumpers or rubber trim.
- Check and adjust: After tightening, tug on the canoe to ensure it is secure. Check straps periodically on long trips. Remove the kit when not in use—foam block kits are intended for temporary transport and may allow rainwater into the vehicle if left installed.
What sets it apart
Most universal kits list features like EVA foam, non‑skid surfaces, cam‑buckle straps and bow/stern lines. The Level Six Canoe Transportation Kit delivers these essentials while simplifying setup (no metal buckles to scratch your canoe) and offering a generous 5‑m centre strap for larger boats. Its integrated V‑straps distribute tension evenly, reducing the risk of twisting, and the mesh bag keeps everything tidy in your vehicle. It’s a practical choice for those new to canoe transport and a reliable standby for experienced paddlers who value a quick, adaptable system.